YOU ARE HERE: Home > Products > Door Frames > Adjustable (A Series) > Single

uses 		 LODGING OFFICE MEDICAL
OFFICE		 DORMITORIES BUILDINGS
OF WORSHIP
 		 ASSISTED
LIVING		 MULTI-
FAMILY		 SCHOOLS HOSPITAL
non-surgical		 SINGLE
FAMILY
ADJUSTABLE FRAME (A-Series) SINGLE
 

    ADJUSTABLE FRAME (A-Series) – Single | Related Information

    ADJUSTABLE FRAME (A-Series) – Single | Fire Rating

    Icon for Fire Rating FIRE RATING

    JAMB DEPTH RANGE 45, 90 Minute GENERAL INFORMATION

    Min. Jamb Depth:

    3 3/4"

     

    Max. Jamb Depth:

    9 1/8"

    Max. Door Width:

    4' – 0"

     

    Max. Door Height:

    8' – 0"

     
    1. All openings approved for Positive and Neutral pressure unless otherwise noted.
    2. All ratings apply to steel stud, wood stud, or masonry construction.
    3. All ratings approved for category “A” and “B” doors with category “G” edge sealing.
    4. Timely’s fire rated Metal “U” Insert is recomended for masonry installations. If wood sub-frame is used in place of Metal “U” Insert, it will be necessary to use fire rated drywall on both sides of wood to maintain fire rating.
    5. Wood, Aluminum or PVC casing does not affect ratings on door frames. Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.
    6. Single frames must be prepared for strike or reinforced with (TA-12) for a rim exit device strike.
    7. Embossed WHI 90 min. label is available for Primer Galvanized Frames only.
    8. Metal 90 min. label riveted to frame is available.

    View minimum screw length here

     

    All dimensions shown are inside dimensions – net door opening size.

     

    Distributors of Timely Frames may be approved to purchase labels and apply them to frames at their own facility. Intertek has set guidelines and a fee schedule for this program. Requirements and prices are available from Timely or Intertek.

    ADJUSTABLE FRAME (A-Series) – Single | Rough Openings

    ROUGH OPENING DIMENSION Rough Opening Classic Single/Dutch - Rough Opening
    WIDTH

    Rough opening width is 1 1/4" over nominal door width. This provides for 5/8" clearance between the jamb and the wall. This clearance is necessary for the pocket on the strike and the projection of the hinge screws. Frames can be installed with smaller opening widths but, in some cases, the framing must be relieved to provide the necessary clearance for plumbing the frame and installing the hardware. Opening width maximum is 1 7/8" which allows 5/16" of the frame face against the wall. For wider rough openings, the frame must be positioned with equal clearance on both sides. (Use oval alignment slots to adjust clearance when installing)
    ROUGH OPENING WIDTH: Standard Frames (A-Series) –
    Nominal door width + 1 1/4"    		  
    HEIGHT

    Rough Opening height must provide clearance to level the header and interlock the jambs. Uneven floors will affect this measurement. Maximum space for adequate anchorage is 1 3/16" over net height resulting in approximately 5/16" of the frame face against the wall. While this is not recommended, the frame can still be installed.

    		  
    Timely standard height – 3/16" over nominal.  
    ROUGH OPENING HEIGHT: Nominal Height + 1" (Net height +13/16")
    Net Height – Frames manufactured to net heights
    ROUGH OPENING HEIGHT: Net height + 13/16"
    Download Adjustable – Single | Rough Opening image  
       

    ADJUSTABLE FRAME (A-Series) – Single | Casing Options

    Casing Profiles for Timely Steel Door Frames

    Please select “Products > Casing Options” from the main menu if you require additional information regarding Timely’s casing options.
    Note: Wood casing can easily be applied to Timely frames. This requires a frame without Casing Retainer Clips. Specify frames with nail holes and oval slots (NHOS) only Wood casing is then installed over the frame face using a nail gun or trim head screws. Casing profile must provide back clearance for screw heads used to install frame.

    Fire Ratings: Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.

    ADJUSTABLE FRAME (A-Series) – Single | Color Options

    Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive atmosphere or exterior installations.

    STOCK COLORS         PRE-MATCHED RAL FINISHES (Powder Coated)  
    Standard Price

    Consult factory for pricing.

    		 
    Timely carries a large raw materials inventory of Stock finishes.
    browntone chip
    BROWNTONE
    (SC101)*†

    Sherwin-Williams RAL Color Program gives metal finishers leading technology in 188 vibrant RAL colors, resulting in consistent color and long-lasting finishes.

    Available in convenient 25-pound quantities. Average lead time of 3-8 days for delivery of Powder to painter.

    Sherwin-Williams RAL color chart Note: color chart will open in a new window, just close window to return here.

    		  
     
    western White chip
    WESTERN WHITE
    (SC107)*†
     
    primer EG chip
    PRIMER EG
    (SC109)*†
      CUSTOM COLORS
    Add 52¢ per ft. Submit color chip for matching. Consult factory for pricing.
    autumn Brown chip

    * Sherwins Williams RAL Color Chart Note: color chart will open in a new window, just close the window to return here.
    AUTUMN BROWN
    (SC102)*
       
    black chip  
    BLACK
    (SC103)*†    		      
     
    Stone Grey chip  
    STONE GRAY
    (SC106)*    		  
     
    alumatone Chip
    ALUMATONE
    (SC108)*    ⊗

    *Available for Adjustable Frames in powder coat

    †Available prefinished for Fixed Throat Kerf frames

    ⊗Close match to clear anodized aluminum

    		    
     

    ADJUSTABLE FRAME (A-Series) | Frame ProfilesIcon A Series Large

    Click to enlarge drawings

    A-SERIES 18 GAGE CRS
    1 3/4" Door
    Adjustable - Frame Profile (54A) Adjustable - Frame Profile (73A)
    Adjustable - Frame Profile (83A) Adjustable - Frame Profile (91A)
      NOTES: 1. Mullions and Sidelights are not avaliable for A-Series frames.        2. Profiles are shown with TA-8 Casing for example only.

    ADJUSTABLE FRAME (A-Series) – Single | Elevations

    Click to enlarge drawings

    ADJUSTABLE FRAME (A-Series) – Single | Details

    Click to enlarge drawings

    ADJUSTABLE FRAME (A-Series) – Single

    PDF Image Thumb Adjustable Single Download File in Adobe Acrobat Format PDF DOWNLOAD Adjustable – Single.pdf To save the file, right click on the link, choose to Save Link As and save the file to a location on your computer.