PREFIT SPECIFICATIONS
Frame Hinge and Strike Locations
1 3/8" with 4 Each 3 1/2" Hinges
435
NOTE: When using this chart for premachining door measurements, reduce the A & D dimensions 3/32" each for door clearance.
click here for Door Machining Guide
click here Prefit Specifications (435) – print layout
3° Bevel (Both Sides)
3/32" Clearance (Both Sides)
3/32" Clearance (Top)
3/32" Clearance (Bottom)*
*Additional clearance is required for Thresholds and various
floor conditions.
FOR SPECIFICATIONS NOT SHOWN, PLEASE CONSULT OFFICE.
PLEASE SPECIFY IF USING COMMERCIAL OR RESIDENTIAL
WEIGHT HINGES.
NET FRAME DIMENSIONS | |||||
+HEIGHT | A | B | C | D | |
6-0 | 10-3/32 | 17-1/4 | 17-1/2 | 32-3/32 | |
6-8 | 10-3/32 | 20 | 20 | 40-3/32* | |
6-9 | 10-3/32 | 20-1/4 | 20-1/2 | 41-3/32 | |
6-9 | 10-3/32 | 20-1/4 | 20-1/2 | 40-19/32* | |
6-10 | 10-3/32 | 20-1/2 | 21 | 42-3/32 | |
7-0 | 10-3/32 | 21-1/4 | 21-1/2 | 44-3/32 | |
7-0 | 10-3/32 | 21-1/4 | 21-1/2 | 42-3/32* | |
7-2 | 10-3/32 | 22 | 22 | 46-3/32 | |
7-4 | 10-3/32 | 22-1/2 | 23 | 48-3/32 | |
7-6 | 10-3/32 | 23-1/4 | 23-1/2 | 50-3/32 | |
7-8 | 10-3/32 | 24 | 24 | 52-3/32 | |
7-10 | 10-3/32 | 24-1/2 | 25 | 54-3/32 | |
8-0 | 10-3/32 | 25-1/4 | 25-1/2 | 56-3/32 | |
8-2 | 10-3/32 | 26 | 26 | 58-3/32 | |
8-4 | 10-3/32 | 26-1/2 | 27 | 60-3/32 | |
8-6 | 10-3/32 | 27-1/4 | 27-1/2 | 62-3/32 | |
8-8 | 10-3/32 | 28 | 28 | 64-3/32 | |
8-10 | 10-3/32 | 28-1/2 | 29 | 66-3/32 | |
9-0 | 10-3/32 | 29-1/4 | 29-1/2 | 68-3/32 | |
9-4 | 10-3/32 | 30-1/2 | 31 | 72-3/32 | |
9-8 | 10-3/32 | 32 | 32 | 76-3/32 | |
10-0 | 10-3/32 | 33-1/4 | 33-1/2 | 80-3/32 | |
+ Frame Heights are 3/16" longer than callout door height unless ordered net (3/32" top, 3/32" bottom for clearance). |
|||||
Handing Information: To establish handing always Push the door away from you. *Reversible – Frame can be used as Left or Right Hand, swing in our out. |