uses
LODGING OFFICE MEDICAL
OFFICE
DORMITORIES BUILDINGS
OF WORSHIP
 
ASSISTED
LIVING
MULTI-
FAMILY
SCHOOLS HOSPITAL
non-surgical
SINGLE
FAMILY
CLASSIC FRAME (S-Series & C-Series)

Timely Prefinished Steel Door Frames Classic series general information drawing

language switcher

The prefinished steel Classic Frame is our most popular profile. It is the ideal solution for most commercial drywall applications.

 

Our Classic Frame is available in two material thicknesses, S-Series (20 gauge) and C-Series (18 gauge) prefinished steel.

 

Finishing options include 2 standard colors, 4 premium colors, 30 pre-matched custom colors, project matched custom colors or primed for field painting. Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive environments or exterior installations.

 

Fire ratings up to 90 minutes are available for non-glazed openings, and up to 45 minutes for glazed openings.

 

Mullions are available in all jamb depths from 3 1/2" to 13".

 

Classic Frames will accommodate either a 1 3/8" or 1 3/4" door weighing up to 500 lbs.

 

STANDARD JAMB DEPTHS

S-SERIES (20 gauge): 2 1/4", 2 7/8", 3 1/2", 3 3/4", 4", 4 5/8", 4 7/8", 5" and 5 3/8"

C-SERIES (18 gauge): 2 1/4", 2 7/8", 3 1/2", 3 3/4", 4", 4 5/8", 4 7/8", 5", 5 3/8", 6 5/8", 6 7/8" and 7 1/4"

 

CUSTOM JAMB DEPTHS

C-SERIES (18 gauge): 2 1/4" to 13" in 1/8" increments.

 

NOTE: The available jamb depths and door weights listed here apply to the Classic Frame in general. Some limitations may
apply when looking at specific information. For example a communicating frame must have a larger minimum jamb depth
than listed here.

 

Download Classic Frame General Information (S-Series & C-Series)

CLASSIC FRAME (S-Series & C-Series) | Casing Options

Casing Profiles for Timely Steel Door Frames

Please select “Products > Casing Options” from the main menu if you require additional information regarding Timely’s casing options.
Note: Wood casing can easily be applied to Timely frames. This requires a frame without Casing Retainer Clips. Specify frames with nail holes and oval slots (NHOS) only Wood casing is then installed over the frame face using a nail gun or trim head screws. Casing profile must provide back clearance for screw heads used to install frame.

Fire Ratings: Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.

go to english language home page go to french language home page go to spanish language home page