Email Us
PREFIT SPECIFICATIONS
Frame Hinge and Strike Locations
1 3/4" with 4 Each 4 1/2" Hinges
445D
DUTCH
NOTE: When using this chart for premachining door measurements, reduce the A & E dimensions 3/32" each for door clearance.
click here for Door Machining Guide
click here Prefit Specifications (445D-Dutch) – print layout
3° Bevel (Both Sides)
3/32" Clearance (Both Sides)
3/32" Clearance (Top)
3/32" Clearance (Bottom)*
*Additional clearance is required for Thresholds and various
floor conditions.
FOR SPECIFICATIONS NOT SHOWN, PLEASE CONSULT OFFICE.
PLEASE SPECIFY IF USING STANDARD COMMERCIAL OR HEAVY
WEIGHT COMMERCIAL HINGES.
| NET FRAME DIMENSIONS | |||||
| +HEIGHT | A | B | C | D | E |
| 6-0 | 5-11/32 | 21 | 11-1/2 | 29 | 36-3/32 |
| 6-8 | 5-11/32 | 29 | 11-1/2 | 29 | 44-3/32 |
| 6-9 | 5-11/32 | 30 | 11-1/2 | 29 | 45-3/32 |
| 6-10 | 5-11/32 | 31 | 11-1/2 | 29 | 46-3/32 |
| 7-0 | 5-11/32 | 33 | 11-1/2 | 29 | 48-3/32 |
| 7-2 | 5-11/32 | 35 | 11-1/2 | 29 | 50-3/32 |
| 7-4 | 5-11/32 | 37 | 11-1/2 | 29 | 52-3/32 |
| 7-6 | 5-11/32 | 39 | 11-1/2 | 29 | 54-3/32 |
| 7-8 | 5-11/32 | 41 | 11-1/2 | 29 | 56-3/32 |
| 7-10 | 5-11/32 | 43 | 11-1/2 | 29 | 58-3/32 |
| 8-0 | 5-11/32 | 45 | 11-1/2 | 29 | 60-3/32 |
| 8-2 | 5-11/32 | 47 | 11-1/2 | 29 | 62-3/32 |
| 8-4 | 5-11/32 | 49 | 11-1/2 | 29 | 64-3/32 |
| 8-6 | 5-11/32 | 51 | 11-1/2 | 29 | 66-3/32 |
| 8-8 | 5-11/32 | 53 | 11-1/2 | 29 | 68-3/32 |
| 8-10 | 5-11/32 | 55 | 11-1/2 | 29 | 70-3/32 |
| 9-0 | 5-11/32 | 57 | 11-1/2 | 29 | 72-3/32 |
| 9-4 | 5-11/32 | 61 | 11-1/2 | 29 | 76-3/32 |
| 9-8 | 5-11/32 | 65 | 11-1/2 | 29 | 80-3/32 |
| 10-0 | 5-11/32 | 69 | 11-1/2 | 29 | 84-3/32 |
| + Frame Heights are 3/16" longer than callout door height unless ordered net (3/32" top, 3/32" bottom for clearance). |
|||||
 Handing Information: To establish handing always Push the door away from you. *Reversible – Frame can be used as Left or Right Hand, swing in our out. |
|||||