uses 
LODGING OFFICE MEDICAL
OFFICE
DORMITORIES BUILDINGS
OF WORSHIP
 
ASSISTED
LIVING
MULTI-
FAMILY
SCHOOLS HOSPITAL
non-surgical
SINGLE
FAMILY
CLASSIC FRAME (S-Series & C-Series) PAIR WITH GLAZING
Timely Steel Prefinished Door Frames, Classic Series Pair with Glazing Drawing

    CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Related Information

    CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Fire Rating

    CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Rough Openings

    ROUGH OPENING DIMENSIONS – THREE SIDED DOOR FRAMES Rough Opening Classic Pair with Glazing - Rough Opening
    WIDTH

    Rough opening width is 1 1/4" over nominal door width. This provides for 5/8" clearance between the jamb and the wall. This clearance is necessary for the pocket on the strike and the projection of the hinge screws. Frames can be installed with smaller opening widths but, in some cases, the framing must be relieved to provide the necessary clearance for plumbing the frame and installing the hardware. Opening width maximum is 1 7/8" which allows 5/16" of the frame face against the wall. For wider rough openings, the frame must be positioned with equal clearance on both sides. (Use oval alignment slots to adjust clearance when installing)

    WIDTH FOR DOOR AREA (W1): Door width plus astragal (if mounted between doors)
    ROUGH OPENING (W1): Door area width plus 1 1/4"
    WIDTH FOR GLAZED AREA (W2): Door width plus astragal (if mounted between doors) plus total glass width(s) plus 2" for each mullion  
    ROUGH OPENING (W2): Nominal Door width(s) + astragal width (if mounted between the doors) + total width of all glazed openings + 2" for each mullion + 1 1/4"

    HEIGHT

    For a pair of doors, the rough opening height is 1" over nominal height or 13/16" over net height for the door area. Since Timely standard frames are actually 3/16" longer than the nominal height (Timely 7'0" frames are actually 7'0 3/16" long). For the glazed area, the rough opening is 1 1/4" over the total glass height plus 2" for each horizontal mullion.

     
    TIMELY STANDARD HEIGHT FOR DOOR AREA (H1): 3/16" over nominal height
    ROUGH OPENING (H1): Nominal height plus 1"
    Net Height for Door Area – for frames prepared to other manufacturers’ locations
    ROUGH OPENING: Nominal height plus 13/16"
    NET HEIGHT FOR GLASS AREA (H2): height of glazed openings plus 2" for each mullion
    ROUGH OPENING (H2): Total inside height of sidelight plus 1 1/4"
    Download Classic – Pair with Glazing | Rough Opening image  
       

    CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Casing Options

    Casing Profiles for Timely Steel Door Frames

    Please select “Products > Casing Options” from the main menu if you require additional information regarding Timely’s casing options.
    Note: Wood casing can easily be applied to Timely frames. This requires a frame without Casing Retainer Clips. Specify frames with nail holes and oval slots (NHOS) only Wood casing is then installed over the frame face using a nail gun or trim head screws. Casing profile must provide back clearance for screw heads used to install frame.

    Fire Ratings: Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.

    CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Color Options

    Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive atmosphere or exterior installations.

    STOCK COLORS   PRE-MATCHED CUSTOM COLORS  
    Standard Price Custom color matching is also available. Submit color chip for matching. Consult factory for pricing.          
             
    Timely carries a large raw materials inventory of Stock finishes. navaho White chip winter White chip
            NAVAJO WHITE
    (CC104)
      WINTER WHITE
    (CC105)
     
                     
    browntone chip white White chip

      white Smoke chip   bone China chip   designer White chip          
    BROWNTONE
    (SC101)*†
    WHITE WHITE
    (CC301)
      WHITE SMOKE
    (CC302)
      BONE CHINA
    (CC303)
      DESIGNER WHITE
    (CC304)
                     
    western White chip charcol chip   Cape Cod Grey chip   neutral Grey chip   Nickel chip  
    WESTERN WHITE
    (SC107)*†
    CHARCOAL
    (CC401)
      CAPE COD GRAY
    (CC402)
      NEUTRAL GRAY
    (CC403)
      NICKEL
    (CC404)
                     
    primer EG chip drift Wood chip   sandy Beach chip   cameo Beige-chip   cozy Peach chip  
    PRIMER EG (SC109)*† DRIFTWOOD
    (CC501)
      SANDY BEACH
    (CC502)
      CAMEO BEIGE
    (CC503)
      COZY PEACH
    (CC504)
    Add 52¢ per ft.
                   
    autumn Brown chip brown Sugar chip   cocoa chip   doe Skin chip   harvest Mood chip  
    AUTUMN BROWN
    (SC102)*
    BROWN SUGAR
    (CC601)
      COCOA
    (CC602)
      DOESKIN
    (CC603)
      HARVEST MOON
    (CC604)
                     
    black chip cordovian chip   ruby Red chip   rose Dust chip   mauve Mist chip  
    BLACK
    (SC103)*†
    CORDOVAN
    (CC701)
      RUBY RED
    (CC702)
      ROSEDUST
    (CC703)
      MAUVE MIST
    (CC704)
                     
    Stone Grey chip pacific Blue chip   Twilight chip   country Blue chip   jade chip  
    STONE GRAY
    (SC106)*
    PACIFIC BLUE
    (CC801)
      TWILIGHT
    (CC802)
      COUNTRY BLUE
    (CC803)
      JADE
    (CC901)
                     
    alumatone Chip
    kentucky Grass chip   miami Waters chip   malibu Green chip   black nickle Chip.png  
    ALUMATONE
    (SC108)*
    KENTUCKY GRASS (CC902)   MIAMI WATERS
    (CC903)
      MALIBU GREEN
    (CC904)
      BLACK NICKEL

    (CC 905)◊

                     

    *Available for Adjustable Frames in powder coat

    †Available prefinished for Fixed Throat Kerf frames

    Close match to clear anodized aluminum

    Metal Plating with Clear Coat Gloss


     
    ELITE SERIES   black nickle Chip.png   black nickle Chip.png   black nickle Chip.png  
     
    Colors shown may vary slightly.   BRIGHT SOLID BRASS (ES201) STAINLESS STEEL 430 BRIGHT (ES204) 304 #4 BRUSHED STAINLESS STEEL (ES206)  
        BRIGHT PLATED BRASS (ES202)      
       

    CLASSIC FRAME (S-Series) – Single / Dutch | Frame Profiles Icon S Series Large

    Click to enlarge drawings

    S-Series 20 gage CRS
    1 3/8" Door Available in both door sizes 1 3/4" Door
    Classic S-Series Frame Profile (A) Minimum order quantity of 100
    frames for Profiles A and G.
    Classic S-Series Frame Profile (G)
    Classic S-Series Frame Profile (C) Classic S-Series Frame Profile (F) Classic S-Series Frame Profile (J)
    S-series Footer

    CLASSIC FRAME (C-Series) – Single / Dutch | Frame Profiles Icon C Series Large

    Click to enlarge drawings

    C-Series 18 gage CRS
    1 3/8" Door Available in both door sizes 1 3/4" Door
    Classic C-Series Frame Profile (A) Classic C-Series Frame Profile Classic C-Series Frame Profile (G)
    Classic C-Series Frame Profile (B) Classic C-Series Frame Profile (E) Classic C-Series Frame Profile (H)
    Classic C-Series Frame Profile (C) Classic C-Series Frame Profile (F) Classic C-Series Frame Profile (J)
    Classic C-Series Frame Profile (CC) Classic C-Series Frame Profile (FF) Classic C-Series Frame Profile (JJ)
    Classic C-Series Frame Profile (CE) Classic C-Series Frame Profile (FE) Classic C-Series Frame Profile (JE)
    Classic C-Series Frame Profile (D) Classic C-Series Frame Profile (channel section) Classic C-Series Frame Profile (K)
    Classic C-Series Frame Profile (EE)
    FX  3 ¾" FACE HEADER — Use with sub frame for CMU Application
    EX  3 ¾" FACE NO STOP HEADER — Use with standard frame for Concealed Overhead Closer Installation
    FXi  3 ¾" FACE INSERT — Use for sub frame at head with standard frame in CMU
    Classic C-Series Frame Profile (Fex) Classic C-Series Frame Profile (Eex) Classic C-Series Frame Profile (Eexi)
    GLASS STOP OR DOOR PANEL CAN BE APPLIED TO ONE OR BOTH SIDES OF ANY MULLION OR JAMB.
    Classic C-Series Frame Profile (Mullion w/Glazing) Classic C-Series Frame Profile (Frame w/Stop and Glazing)) Classic C-Series Frame Profile (Mullion w/Glazing No Stop)
     
    NOTES: 1. C-Series Sidelights are only avaliable in Profiles C, E, F or I.    2. 4" Sidelights are only avaliable in Profiles E or G.     3. Profiles are shown with TA-8 Casing for example only.
     

    CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing | Elevations

    Click to enlarge

    CLASSIC FRAME (S-Series & C-Series) – Single with Glazing | Details

    Click to enlarge drawings

    CLASSIC FRAME (S-Series & C-Series) – Pair with Glazing

    PDF Image Thumb Classic Pair with Glazing Download File in Adobe Acrobat Format PDF DOWNLOAD Classic Pair with Glazing.pdf To save the file, right click on the link, choose to Save Link As and save the file to a location on your computer.