uses 
LODGING OFFICE MEDICAL
OFFICE
DORMITORIES BUILDINGS
OF WORSHIP
 
ASSISTED
LIVING
MULTI-
FAMILY
SCHOOLS HOSPITAL
non-surgical
SINGLE
FAMILY
KERFED FRAME (CK-Series) SINGLE
Timely Frames Kerfed Frame Single Drawing

    KERFED FRAME (CK-Series) – Single | Related Information

    KERFED FRAME (CK-Series) – Single | Fire Rating

    Icon for Fire Rating FIRE RATING

    JAMB DEPTH RANGE 20 Minute* 45, 90 minute GENERAL INFORMATION
    Min. Jamb Depth:

    4"

     

    Max. Jamb Depth:

    8'

    Max. Width:

    4' – 0"

     

    Max. Height:

    10' – 0"

     

    Max. Width:

    4' – 0"

     

    Max. Height:

    9' – 0"

    1. All openings approved for Positive and Neutral pressure unless otherwise noted.
    2. All ratings apply to steel stud, wood stud, or masonry construction.
    3. All ratings approved for category “A” and “B” doors with category “G” edge sealing.
    4. Timely’s fire rated Metal “U” Insert is recommended for masonry installations. If wood sub- frame is used in place of Metal “U” Insert, it will be necessary to use fire rated drywall on both sides of wood to maintain fire rating.
    5. Wood, Aluminum or PVC casing does not affect ratings on door frames. Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.
    6. Single frames must be prepared for strike or reinforced with (TA-47) for a rim exit device strike.
    7. Embossed WHI 90 min. label is available for Primer Galvanized Frames only.
    8. Metal 90 min. label riveted to frame is available.

    View minimum screw length here

     

    All dimensions shown are inside dimensions – net door opening size.

     

    * Tested and approved for Neutral Pressure only – not Positive Pressure approved.

     

    Distributors of Timely Frames may be approved to purchase labels and apply them to frames at their own facility. Intertek has set guidelines and a fee schedule for this program. Requirements and prices are available from Timely or Intertek.

    KERFED FRAME (CK-Series) – Single | Rough Openings

    ROUGH OPENING DIMENSIONS – THREE SIDED DOOR FRAMES Rough Opening Classic Single/Dutch - Rough Opening
    WIDTH

    Rough opening width is 1 1/4" over nominal door width. This provides for 5/8" clearance between the jamb and the wall. This clearance is necessary for the pocket on the strike and the projection of the hinge screws. Frames can be installed with smaller opening widths but, in some cases, the framing must be relieved to provide the necessary clearance for plumbing the frame and installing the hardware. Opening width maximum is 1 7/8" which allows 5/16" of the frame face against the wall. For wider rough openings, the frame must be positioned with equal clearance on both sides. (Use oval alignment slots to adjust clearance when installing)

    ROUGH OPENING WIDTH: Standard Frames (CK-Series) –
    Nominal door width + 1 1/4"
     
    HEIGHT

    Rough Opening height must provide clearance to level the header and interlock the jambs. Uneven floors will affect this measurement. Maximum space for adequate anchorage is 1 3/16" over net height resulting in approximately 5/16" of the frame face against the wall. While this is not recommended, the frame can still be installed.

     
    Timely standard height – 3/16" over nominal.  
    ROUGH OPENING HEIGHT: Nominal Height + 1" (Net height +13/16")
    Net Height – Frames manufactured to net heights
    ROUGH OPENING HEIGHT: Net height + 13/16"
    Download Kerfed – Single | Rough Opening image  
       

    KERFED FRAME (CK-Series) – Single | Casing Options

    Casing Profiles for Timely Steel Door Frames

    Please select “Products > Casing Options” from the main menu if you require additional information regarding Timely’s casing options.
    Note: Wood casing can easily be applied to Timely frames. This requires a frame without Casing Retainer Clips. Specify frames with nail holes and oval slots (NHOS) only Wood casing is then installed over the frame face using a nail gun or trim head screws. Casing profile must provide back clearance for screw heads used to install frame.

    Fire Ratings: Wood casing must be applied with hot melt glue or contact adhesive on 90 minute rated frames and on all glazed openings with 45 minute or 60 minute rating. On all other fire rated frames, wood casing can be applied with nails or finish head screws on jambs and mullions.

    KERFED FRAME (CK-Series) – Single | Color Options

    Galvanizing is available for all painted finishes and is REQUIRED in areas subject to high humidity, corrosive atmosphere or exterior installations.

    STOCK COLORS   PRE-MATCHED CUSTOM COLORS  
    Standard Price Custom color matching is also available. Submit color chip for matching. Consult factory for pricing.          
             
    Timely carries a large raw materials inventory of Stock finishes. navaho White chip winter White chip
            NAVAJO WHITE
    (CC104)
      WINTER WHITE
    (CC105)
     
                     
    browntone chip white White chip

      white Smoke chip   bone China chip   designer White chip          
    BROWNTONE
    (SC101)*†
    WHITE WHITE
    (CC301)
      WHITE SMOKE
    (CC302)
      BONE CHINA
    (CC303)
      DESIGNER WHITE
    (CC304)
                     
    western White chip charcol chip   Cape Cod Grey chip   neutral Grey chip   Nickel chip  
    WESTERN WHITE
    (SC107)*†
    CHARCOAL
    (CC401)
      CAPE COD GRAY
    (CC402)
      NEUTRAL GRAY
    (CC403)
      NICKEL
    (CC404)
                     
    primer EG chip drift Wood chip   sandy Beach chip   cameo Beige-chip   cozy Peach chip  
    PRIMER EG (SC109)*† DRIFTWOOD
    (CC501)
      SANDY BEACH
    (CC502)
      CAMEO BEIGE
    (CC503)
      COZY PEACH
    (CC504)
    Add 52¢ per ft.
                   
    autumn Brown chip brown Sugar chip   cocoa chip   doe Skin chip   harvest Mood chip  
    AUTUMN BROWN
    (SC102)*
    BROWN SUGAR
    (CC601)
      COCOA
    (CC602)
      DOESKIN
    (CC603)
      HARVEST MOON
    (CC604)
                     
    black chip cordovian chip   ruby Red chip   rose Dust chip   mauve Mist chip  
    BLACK
    (SC103)*†
    CORDOVAN
    (CC701)
      RUBY RED
    (CC702)
      ROSEDUST
    (CC703)
      MAUVE MIST
    (CC704)
                     
    Stone Grey chip pacific Blue chip   Twilight chip   country Blue chip   jade chip  
    STONE GRAY
    (SC106)*
    PACIFIC BLUE
    (CC801)
      TWILIGHT
    (CC802)
      COUNTRY BLUE
    (CC803)
      JADE
    (CC901)
                     
    alumatone Chip
    kentucky Grass chip   miami Waters chip   malibu Green chip      
    ALUMATONE
    (SC108)*
    KENTUCKY GRASS (CC902)   MIAMI WATERS
    (CC903)
      MALIBU GREEN
    (CC904)
       
                     
    *Available for Adjustable Frames in powder coat
    †Available prefinished for Fixed Throat Kerf frames

     
    CUSTOM COLORS      

     

     
    Submit color chip for matching. Consult factory for pricing.

     

     
     
                   
     

     

     

       

    KERFED FRAME (CK-Series) | Frame ProfilesIcon CK Series Large

    Click to enlarge drawings

    CK-SERIES 18 GAGE CRS
      1 3/4" Door  
      This profile may also be used
    for communicating doors.
    Kerfed - Frame Profile (U) Kerfed - Frame Profile (V)
      NOTES: 1. Mullions and Sidelights are not avaliable for CK-Series frames.        2. Profiles are shown with TA-8 Casing for example only.

    KERFED FRAME (CK-Series) – Single | Elevations

    Click to enlarge drawings

             
               

    KERFED FRAME (CK-Series) – Single | Details

    Click to enlarge drawings

    KERFED FRAME (CK-Series) – Single

    PDF Image Thumb Kerfed-Single Download File in Adobe Acrobat Format PDF DOWNLOAD Kerfed-Single.pdf
    To save the file, right click on the link, choose to Save Link As and save the file to a location on your computer.